Unique Features

Microprocessor / PLC based control
Energy efficient & reliable scroll compressor with hermetically sealed suction gas cooled motor
High performance, low maintenance system with switching cycle control
Crank case heater to prevent liquid migration of refrigerant in compressor
Filter dryer to ensure moisture free system
Sight glass with moisture indicator
Large size stainless steel insulated tank to prevent heat loss
Dry running protection of pump by water level sensor in the tank
Water re-feeding valve to maintain level in the tank automatically
Antifreeze thermostat for protection of evaporator and compressor
High volume, high pressure pump with stainless steel impeller
Inbuilt process water bypass with valve
All chilled water contact surfaces are non ferrous for protection against corrosion
All wetted surfaces are stainless steel, copper or other non ferrous material
Proven component suppliers like Danfoss, Copeland, Grundfos, Ebm, Siemens have been chossen for ultimate reliability
Tool free access panels and a neatly organized internal component layout provide easy access and service. Simply remove the panels to gain access to the entire cabinet of the chiller

Unique feature

Microprocessor / PLC based control
Energy efficient & reliable scroll compressor with hermetically sealed suction gas cooled motor
High performance, low maintenance system with switching cycle control
Crank case heater to prevent liquid migration of refrigerant in compressor
Filter dryer to ensure moisture free system
Sight glass with moisture indicator
Large size stainless steel insulated tank to prevent heat loss
Dry running protection of pump by water level sensor in the tank
Water re-feeding valve to maintain level in the tank automatically
Antifreeze thermostat for protection of evaporator and compressor
High volume, high pressure pump with stainless steel impeller
Inbuilt process water bypass with valve
All chilled water contact surfaces are non ferrous for protection against corrosion
All wetted surfaces are stainless steel, copper or other non ferrous material
Proven component suppliers like Danfoss, Copeland, Grundfos, Siemens have been chossen for ultimate reliability
Tool free access panels and a neatly organized internal component layout provide easy access and service. Simply remove the panels to gain access to the entire cabinet of the chiller
All chillers are factory tested under load prior to shipment
Shell and Tube Condenser - high surface area with externally finned copper tube, design for Indian ambient condition
Brazed Plate Evaporator / Shell and Tube Evaporator - provide higher heat transfer coefficients due to reduced fouling
Evaporator Stainer - protects the evaporator from solid contaminants in the process water stream
Condenser Water Strainer - helps to protect the condenser from solid contaminants in the condenser water

Advantage

Air Chiller Air Cooled is used to supply a cooled air ring of blown film extrusion line. Cooling of air with the help of direct expansion of refrigerant saves energy compare to conventional water chiller plus heat exchanger system
Air Chiller Air Cooled is used to supply a cooled air ring of blown film extrusion line. Cooling of air with the help of direct expansion of refrigerant saves energy compare to conventional water chiller plus heat exchanger system
Five SAC series chillers have cooling capacity of 9.4 TR to 28.5 TR with operating temperature of 5°C to 20°C in ambient air temperature up to 40°C
Compact in size which reduce foot print up to 25% compare to conventional water chiller plus heat exchanger system

Advantage

Air Chiller Air Cooled is used to supply a cooled air ring of blown film extrusion line. Cooling of air with the help of direct expansion of refrigerant saves energy compare to conventional water chiller plus heat exchanger system
Air Chiller Air Cooled provides consistent air temperature irrespective of ambient condition which is very essential for processing of plastics on blown film lines
Five SAC series chillers have cooling capacity of 9.4 TR to 28.5 TR with operating temperature of 5°C to 20°C in ambient air temperature up to 40°C
Compact in size which reduce foot print up to 25% compare to conventional water chiller plus heat exchanger system

Screw Chiller (Air Cooled Water Chiller)

Cooling Capacity from 30 TR to 100 TR Energy Efficient Central Chilling Plant.
Provide chilled fluid for industrial application from a central location with the Swift Air Cooled SK series central chillers.
Simple design of screw compressors provide both full load and part load efficiencies unmatched in the industry, and result in lower energy costs when compared to reciprocating compressors.

Unique Features

Precise control of temperature by PID temperature controller
Oil based system for maximum 150°C temperature
Water based system for maximum 95°C temperature.
Digital display of set and actual value on screen
Air purging facility for mould changes
High flow and high pressure powerful pump.
Easy to operate.
Dry running protection of pump by level monitoring device.
Automatic water refilling provision in water based unit.
Painted with P.U. paint
Accessibility from all sides
Corrosion proof material in water line.
User friendly control and fault indication.
Overload protection of pump.
Audible alarm for fault indication.